CONMEC M3 Series
Glued Steel Fiber
High Tensile Strength (>1300 MPa) Concrete Reinforcement
CONMEC M3 Series is a high-performance glued hooked-end steel fiber. Designed to replace traditional steel mesh, it offers superior crack control and impact resistance for industrial flooring.
- High Tensile Strength: Made from cold-drawn wire, >1100 MPa to >1300 MPa.
- Glued Technology: Water-soluble glue ensures fibers disperse evenly without balling.
- Cost Effective: Replaces rebar/mesh, saving construction time and labor.
- 3D Reinforcement: Evenly distributed throughout the concrete slab.
Technical Specifications M3 Series
Conformity: ASTM A820 / EN 14889-1. Material: Low Carbon Steel Wire.
| Model Type | Length (mm) | Diameter (mm) | Aspect Ratio (L/D) | Tensile Strength (MPa) |
|---|---|---|---|---|
| M3 100/60 | 60 | 0.62 (Equiv.) | 100 | > 1100 |
| M3 80/60 | 60 | 0.75 | 80 | 1250 |
| M3 75/55 | 55 | 0.75 | 75 | 1250 |
| M3 45/35 | 35 | 0.75 | 45 | > 1100 |
Why Switch to Steel Fiber?
CONMEC SFRC Floor
- Fast: Add directly to mixer truck. No on-site prep.
- Efficient: Perfect for Laser Screed machines.
- Jointless: Allows for larger bays, fewer joints.
- Savings: Reduces labor, time, and storage space.
Traditional Mesh Floor
- ❌ Slow: 2 days prep time for cutting & tying rebar.
- ❌ Difficult: Restricts movement of equipment (Pump trucks needed).
- ❌ Risk: Mesh can be trampled to the bottom, losing effectiveness.
Get a Quote for Your Project
Tell us your concrete slab requirements, and we will recommend the right dosage.